Contents

Advances A - 2005

Vol. 42 nº 1
“Reduced and simplified reduced order models for two – time scale systems”.
Mihra M. Salama ( Egypt) ........................................................ ............................... 1
“Graphical illustration of continuous changes in RHS values of LP problem”.
P. O. Ekoko ( Nigeria) .............................................................. ............................. 21
“Linear multi – step methods for the numerical solutions of special ordinary differential equations”.
E. A. Ibijola; F. Matthew - Ojelabi ( Nigeria)................................ ........................... 35
“Finding Shortest distance in the presence of barriers: an alternate approach”.
S. K. Peer; Dinesh K. Sharma; Rakesh K. Sharma ( India - USA) ................ .......... 45

Vol. 42 nº 2
“Non – simplicity of infinite groups”.
S. N. Kozulin; VI. Senashov; V. P. Shunkov ( Russia) .......................... .................... 1
“The rejects and the semicogenerators”.
Huda Mohammed J. Al – thani ( Qatar) ..................................................... .. ........... 19
“Comparison of agents knowledge in a distributed information system”.
Czeslaw Danilowicz ( Poland) ....................................................................... ........... 29
“A lower bound for the number of crossings of x – axis of a class of random algebraic curves”.
Chapala Bohidar; N. N. Naik; S. Bagh ( India) .............................................. ........... 41
“Cubic spline methods for nonlinear second kind volterra integral equations with singular kernels”.
Sheo Kumar; Harsh Kumar Verma ( India) .................................................... ........... 49
“Expanding the scope of usage of computer in solving practical LP problems”.
P. O. Ekoko ( Nigeria) .................................................................................. ........... 59

Vol. 42 nº 3
“Special finsler spaces admitting C – conformal change”.
S. K. Narasimhamurthy; C. S. Bagewadi; H. G. Nagaraja (India) .................... .......... 1
“On the propagation of waves in a nonlinear viscoelastic medium”.
P Stiuca; V. Chiroiu ( Romania) ..................................................................... .......... 13
“Almost layer – finite groups without involutions”.
V. I. Senashov ( Russia) ................................................................................ .......... 33
“Almost layer – finiteness of locally finite groups”.
V. P. Shunkov ( Russia) ................................................................................ .......... 45
“Orthonormal wavelet bases using spline harmonic basis functions”.
R. Panda; M. Dash ( India) ............................................................................ .......... 55

Vol. 42 nº 4
“Use of tolerance approach to fuzzy goal programming problems”.
N. M. Badra ( Egypt) ...................................................................................... .......... 1
“Use of fuzzy tolerance approach in optimisation techniques”.
N. M. Badra ( Egypt) ................................................................................. .. ........... 13
“A comparative study of performances of artificial neural network and fuzzy system
development for short term load forecasting”.
M. F. Qureshi; R. K. Yadav; M. K. Tandey ( India) ....................................... ........... 31
“An algorithm for parametric large scale integer linear multiple objective decision making problems”.
Tarek H. M. Abou – El - Enien ( Egypt) ......................................................... ........... 51

Vol. 42 nº 5
“Study on multilayer multidimensional extension set”.
Cao Shaozhong ; Yang Guowei; Tu Xuyan (P. R. China) .................................... .......... 1
“Solving linear quadratic optimal control problems using legendre polynominal”.
J. O. Omolehin; L. Sinkaye ( Nigeria) ............................................................... .......... 23
“A simulation scheme for simplification of linear time invariant discrete systems using
rule – based error minimization technique”.
S. N. Sivanandam; R. Venkatesan; J. Suganthi ( India) ..................................... ........... 35
“On two subgroups of periodic shunkov’s groups”.
V. I. Senashov ( Russia) ................................................................................... .......... 53
“On 3 - dimensional trans – sasakian manifolds”.
Venkatesha; C. S. Bagewadi (India) ................................................................. .......... 63

Vol. 42 nº 6
“Infinite frobenius groups”.
S. N. Kozulin; V. I. Senashov; V. P. Shunkov ( India)......................................... .......... 1
“Impulsive robust control of lur’e systems with several stationary components”.
Y. Zhang; J. Sun (P. R. China) ........................................ .. ........................................ 19
“An algorithm for solving large scale multiple objective decision making problems
using TOPSIS approach”.
M. A. Abo – Sinna; T. H. M. Abou – El – Enien ( Egypt ) ............................... ........... 31
“General 0 – 1 fractional programming problems using fuzzyness”.
N. M. Badra ( Egypt) ...................................................................................... ........... 49
“The Limit cycle in a class of quantico – polynomial system”.
Liang Jinpeng (P. R. China) .............................................................................. ........... 65

Advances B - 2005

Vol. 48 nº 1
“A simulation comparison of multiuser detection techniques in CDMA systems”.
A. Rajeswari; A. Shanmugam; K. Gunavathi ( India) .............. ....................................... 1
“Reception of the APT weather satellite images”.
A. Hassini; N. Benabadji; A. H. Belbachir (Algeria) ........................................... .......... 25
“Design and simulation of fuzzy based system for reasoning the performance of inverse
definite minimum time (IDMT) relay using neuro – genetic algorithm”.
M. F. Qureshi; A. Saxena; H. S. Hota; N. Chhalottra (India).............................. .......... 43
“Stability and absence of overflow oscillations in two – dimensional digital filters
described by the fornasini – marchesini second model”.
Mohamed Bellouki; Abdelaziz Hmamed ( Morocco) .......................................... .......... 59

Vol. 48 nº 2
“Multiple criteria decisi on – making theory applications and software: a literature review”.
M. S. A. Osman; S. A. Hasan; T. H. M. Abou - El Enien; S. M. Mohamed (Egypt).......... 1
“Underwater acoustic communication system with trellis coded modulation (TCM)
technique and its DSP implementation”.
Ru Xu; En Cheng; Hui Liu; Shu wu Chen; Chun li Liang; Hua wei Guo (P. R. China)........ 37
“High performance fuzzy histeresis control and parameters optimisation of shunt
active power filter”.
F. Mekria; B. Mazari; M. Machmoum ( Algeria - France).................................... ........... 53

Vol. 48 nº 3
“The high efficiency data compression based on neural network for power system
fault recorder”. Yang Guowei (P. R. China) ............................................................ ..........1
“Instance – based digit recognition”. K. El - Hindi (Jordan) ................................... ..........13
“Accelerating fractal image compression by domain pool reduction adaptive partitioning
and structural block classification”. A. Boukhelif ( Algeria) .................................... ..........27
“Modelling and general analysis of the inset – fed rectangular patch antenna”.
A. Latif; A. Oulad - Said; A. Ait – Ouaman ( Morocco) .......... .......................................43
“An algorithm for image data compression. A combined approach”.
V. Srinivasa Raghavan; V. Subbiah Bharathi; S. Sankar Ganesh; L. Ganesan ( India).........61

Vol. 48 nº 4
“Denoising of non – gaussian and film grain noise using wavelet transform”.
W. A. Mahmoud; I. K. Ibrahim ( Iraq) ................................... ......................................... 1
“Compression of wave file by linear scaling”.
R. R. William; N. Ch. S. N. Iyengar ( India) ........................................................ ........... 19
“ANN based disturbance analysis, detection and classification scheme for power
quality applications”.
S. Suresh Kumar; V. Subbiah; A. Kandaswamy; S. N. Sivanandam; P. Prabahran ( India) 37
“Face recognition using oriented laplacian pyramid”.
R. Panda; M. Dash; L. Samantaray ( India) .......................................................... ........... 53

Vol. 48 nº 5
“A web accessible expert system for disease management in tea”.
I. Ghosh; R. K. Samanta (India) .............................................................................. .......... 1
“Noise detection and estimation using discrete wavelet transform”.
W. A. Mahmoud; I. K. Ibrahim ( Iraq) ................................................................. ............13
“Colour image denoising using translation – invariant multiwavelet transform”.
W. A. Al – Jauhar; M. E. Al - Dargazli (Iraq) ...................... ............................................ 29
“Quranic based speaker – dependant recognition using triphone/HMM model”.
E. Mourtaga; M. Abdallah; A. Sharieh; S. Serhan ( Jordan)..................................... ..........43
“Modelling of the condition monitoring of cutting tools using adaptive fuzzy inference system”.
V. S. Sharma; S. K. Sharma; A. K. Sharma (India) ............................................... .......... 59

Vol. 48 nº 6
“Automatic topographic colour map analysis system”.
A. Bessaid; H. Bechar; J. M. Ogier ( Algeria - France) ............................................ .......... 1
“Low – complexity multiuser bit – loading algorithm for the downlink of WLAN systems”.
K. El Baamrani; V. P. G. Jiménez; A. G. Armada;
A. A. Ouahman; S. Allaki ( Morocco - Spain ) ..................................................... ........... 15
“Artificial neural networks & multilevel 2 – D wavelet decomposition
code – based iris recognition”. R. Adjoudj; A. Boukelif ( Algeria) .......................... ........... 25
“Subcarrier and power allocation for the downlink of multiuser OFDM transmission”.
K. El Baamrani; V. P. Gil Jiménez; A. García Amada;
A. Ait Ouahman; S. Allaki (Morroco - Spain) ....................................................... ........... 39
“Stability robustness of time delay systems containing saturating actuators”.
T. El Houssaine ( Morocco) .................................................... ......................................... 53
“Prediction of interference due to sand or dust accretion on microwave reflector antennas”.
S. O. Bashir ( Sudan) ................................................. ...................................................... 67

Advances C - 2005

Vol. 60 nº 1
“Decentralized H& control for descriptor systems”.
Yuepeng Chen; Qingling Zhang; Ding Zhai ( China) .................................................. .......... 1
“Data fusion model for the correction of mobile robot trajectory”
Noureddine Slimane; Nour – Eddine Bouguechal ( Algeria) .................................... .......... 23
“Tank level tracking by tuning centroids of fuzzy logic controller”.
K. Chafaa; M. Ghanai; N. Golea; K. Benmahamed ( Algeria) ................................. .......... 43
“Electrical system simulation in qualitative phase space”.
Y. K. Wong; A. B. Rad; C. W. Yu; W. K. Tang (China) ........................................ .......... 59
“A fuzzy self – tuning PI controller for speed control of a field oriented induction motor drive”.
L. Mokrani; R. Abdessemed (Algeria) .............. ................................................................ 77

Vol. 60 nº 2
“Simulation and design of fuzzy logic controller for variable control rod position
in nuclear reactor control”. M. F. Qureshi; J. K. Gabel; I. C. Bharti; G. P. Chhalottra;
R. S. Mahajan; R. S. Parishar (India) ............... ................................................................... 1
“A simple criterion to reduce simulation time and offer quick stability reach in design applications”.
K. R. Chandran; S. N. Sivanandam ( India)........................................................... .. ........... 17
“Design and development of an integrated rice milling plant”.
O. J. Okegbile; S. O. Ubokwe; A. M. Isa ( Nigeria) ................................................ ........... 33
“Application of adaptive identification and control algorithm for discrete time non linear
output feedback system”. N. Selvaganesan; S. Renganathan ( India).......................... ........... 49
“Pneumatic robot leg control via second order sliding mode technique”.
F. Errahimi; N. K. M’Sirdi; H. Abarkane ( Morocco - France) ................................ ........... 63

Vol. 60 nº 3
“Adaptive multivariable generalized predictive control of a continuous fermentation process”.
M. Ait Lafkih ( Morocco) ..................................... ............................................................... 1
“An evolutionary approach for model reduction in linear time invariant continuous systems”.
S. N. Sivanandam; J. Suganthi; R. Venkatesan ( India).............................................. .......... 15
“High performance induction motor drive with on – line rotor resistance estimation using
sliding mode observer”. S. Chaouch; M. S. Nait Sait ( Algeria)................................. .......... 27
“Modelling, Analysis and refinement of time – delay systems using sign criterion”.
K. R. Chandran; S. N. Sivanandam ( India) ............................. .......................................... 39
“Robust stability of linear time – delayed systems with nonlinear uncertain parameters”.
Jitao Sun; Yinping Zhang; Changshui Huang ( China)................................................. .......... 63

Vol. 60 nº 4
“Second order sliding mode control of bipedal walking robot”.
F. Errahim; N. K. M’ Sirdi ; H. Abarkane (Morocco - France) ................................... .......... 1
“Impulsive control of chen systems”.
Yinping Zhang; Jitao Sun (P. R. China) .................................................................. .. ........... 17
“Performance analysis of a high voltage direct current link following disturbances”.
S. A. Zidi; S. Hadjeri; M. K. Fellah ( Algeria) .................. .................................................... 27
“Intelligent controlled buck boost frequency modulated zero current switching
quasi – resonant converter”. U. Sabura Banu; G. Uma; M. A. Panneerselvam ( India)............. 39
“Control structures of target tracking system”.
K. Chafaa; M. Ghanai; K. Benmahamed (Algeria) .................................................... ........... 59

Vol. 60 nº 5
“Mixed delay – independent / delay – dependent robust H& control of uncertain
linear state – delayed systems”. W. L. Li; R. Dong (P. R. China)................................... .......... 1
“On the nonlinear adaptive control of semi – active suspensions”.
F. Mailat; V. Chiroiu; L. Munteanu; S. Donescu ( Romania) ....................................... .......... 15
“Adaptive sliding mode controller for mobile robot”.
N. Slimane; E. Colle; N. E. Bouguechal ( France - Algeria) ............ ........................... .......... 29
“Design of a robust fixed – parameter SVC damping controller through graphical
loop – shaping technique”. S. A. Al Baiyat; A. H. M. A. Rahim ( Saudi Arabia) .......... .......... 43
“Design, modelling and implementation of fuzzy logic controller for electric vehicle using FPGA”.
S. Poorani; K. Udayakumar; S. Renganarayanan ( India) ............................................ .......... 59

Vol. 60 nº 6
“Neural network based robust tracking control for robotic manipulator”.
W. Sun; Y. Wang (P. R. China) ................................................................................... .......... 1
“Delay dependant H& control for neural systems with mixed delays”.
Fan Yang; Quing – Ling Zhang (P. R. China) .............................................................. ............13
“A novel approach for inferring instability using routh column polynomials”.
S. N. Sivanandam; S. N. Deepa ( India) ............................ .................................................... 25
“Cascaded fuzzy controller for combustion control of utility boiler”.
T. R. Rangaswany; J. Shanmugan; K. P. Mohammed; T. Thyagarajan ( India).............. ........... 37
“Evolving simplistic neural controllers toward adaptation to internal perturbations”.
T. Hoinville; P. Hénaff; E. Monacelli ( France) ............... .........................................................57

Advances D - 2005

Vol. 10 nº 1
“An architecture to facilitate the development of parallel and distributed simulation system”.
Ge li; Kurt Lin; Kedi Huang. (P. R. China - USA) .. ................................................................ 1
“The distribution of a sum of n – random variables with compound distribution under
the condition that the sum of random variables has the same distribution”.
Abd – El - Noneom A. M. Teamah; Alaa R. El - Alosey (Egypt).................................. .......... 17
“Conditional independence – based classification of international phrase boundaries”.
M. Maragoudakis; P. Zervas; N. Fakotakis; G. Kokkinakis ( Greece) ......................... .......... 27
“Design and implementation of a physical property databank using visual basic”.
S. S. Ikiensikimama; A. Kuye ( Nigeria) ........................... ..................................................... 41
“Optimal harvesting and stability for a prey – predator system with stage – structure for predator”.
T. Kumar kar ( India) ............................... ............................................................................. 53
“Genetic algorithms for multiprocessor scheduling and comparative studies”.
S. N. Sivanandam; M. Khannan; K. Vijayalakshmi ( India) ...... .............................................. 63

Vol. 10 nº 2
“Multistage sequential interference for the normal mean”.
A. H. Al – Ibrahim; M. S. Son; H. I. Hamdy (Kuwati - USA) ........................................ .......... 1
“Performances analysis of a LLC protocol of a home building network with mobile stations”.
Rachid Beghdad ( Algeria) .................................. .. ................................................................ 19
“A three subculture mathematical model of population distribution within the Christian
community of Nigeria”. S. C. Inyama ( Nigeria) ...... ................................................................. 31
“Prime position encoding, a secured encryption technique, realized by a microprocessor
based system”. S. Mal; J. K. Mandal ( India) .................. ........................................................ 43
“Reliability analysis and optimal design using petri net”.
K. Latha; B. Umamaheswari (India) ............................................................................. ........... 65

Vol. 10 nº 3
“An arrival hyper – poisson machine interference model: H r/M/2/k/N with balking,
reneging and heterogeneous repairmen”. A. I. Shawky ( Egypt – Saudi Arabia)................. .......... 1
“Process scheduling evaluations using multithreaded software modules”.
George K. Adam ( Greece) ...................................................... ............................................... 13
“Design and performance evaluation of ATM congestion control using neural networks”.
R. V. Pujeri; S. N. Sivanandam ( India) ....................... .............................................................27
Modelling of forest fire spreading and suppression on basis of hamilton mechanics methods”.
G. A. Dorrer ( Russia) ............................ ................................................................................ 57

Vol. 10 nº 4
“An approximate actual network performance evaluation method”.
Jozef B. Lewoc; Antoni Izworski; Slawomir Skowronski ( Poland) ................................. .......... 1
“An efficient parallel algorithm for all – pairs – shortest - length problem (APSL) on strongly
chordal graphs”. E. Kannan; R. Ponalagusamy; Michael Arock ( India) .................................... 13
“Modelling ESOP networks for detecting multiple stock – at faults”.
H. Rahaman; D. K. Das ( India ) .................................................................................. ........... 25
“A simple method for model reduction of linear time invariant continuous systems using
two – point expansion scheme”. S. N. Sivanandam; R. Venkatesan; J. Suganthi ( India).. ........... 37
“Statistical model for analysing multi – vehicle accidents”. P. O. Eroko ( Nigeria) ........... ........... 55
“Reproduction function as a probability model”. P. O. Eroko ( Nigeria) . .................................... 65

Modelling A - 2005

Vol. 78 nº 1
“Graphitization of diamond powders under hot pressing conditions and the fabrication of toughened ceramics”. Chonghai Xu (P. R. China) ...... ................................................................................. 1
“Reliability of traction motors. A case study”.
A. K. Sen; A. S. R. Murty ( India) ................................................................................. .......... 11
“The stability region of bipolaron formation related to high – T c superconductivity
in the van hove scenario”.
M. Bouayad; B. El Amrani; T. Lamcherfi; M. Fliyou; E. Abarkan; M. Chaouch (Morocco) ........ 33
“The fuzzy based analysis of dynamic response of RLC parameters in electrical power system
– A reliability approach”. M. F. Qureshi; J. K. Gabel; C. S. Khandey; R.S. Parihar;
R. S. Mahajan; G. P. Chhalotra (India)............................................................................ .......... 43
“Investigation on fault analysis of DY 1 and DY 7 transformer using matrix methods”.
Sudipta Nath; A. K. Mukhopadhyay; A. Chakrabarti ( India)........................................... .......... 57

Vol. 78 nº 2
“Tuneable integrated optical filter based on the variation of incident angle”.
F. Tayeboun; R. Naoum; H. M Tayeboun; R. Aced ( Algeria) ..... ............................................... 1
“Improvement of power quality for a three – level inverter supplying au induction motor”.
M. S. Kelaiaia; H. Labar; S. Kelaiaia; N. Doghmen (Algeria).......................................... ........... 11
“A completely topologic approach for supply restoration of distribution systems”.
H. F. Wang; A. Lazzari (United Kindom) ............................... ................................................... 25
“A novel heuristic algorithm for fault location of distribution systems”.
H. F. Wang; A. Lazzari (United Kindom) ............................................................... ................... 37
“Testing asynchronous sequential circuits using synchronous circuit model”.
M. C. Bhuvaneswari; S. N. Sivanandam ( India) ........................ ................................................ 57

Vol. 78 nº 3
“Thermal modelling and simulation of power transistor”.
R. Rangajaran; A. Kandaswamy; N. Sudheesh; G. Ferish ( India) ....................................... ..........1
“Power system dynamic security assessment using the growing hierarchical self – organizing
feature maps”. M. Bordour; A. Hellal ( Algeria)................................................................. .......... 17
“Transfer capability computations in deregulated power systems using radial basis function
neural networks”. R. Sreerama Kumar; P. Nagendra (India)..........................................................35
“Fuzzy fault detector for three – phase induction machine with compensation for motor
asymmetry and supply voltage unbalance”.
V. Duraisamy; N. Devarajan; D. Somasundareswari; S. N. Sivanandam (India).............................47
“Suppression of armonics in drives using sigma – delta modulation to enhance power quality”.
S. Suresh Kumar; V. Subbiah; A. Kandaswamy ( India) .................................................... ..........59

Vol. 78 nº 4
“Designing and modelling a fuzzy controller for electric vehicles”.
S. Poorani; K. Udaya Kumar; S. Renganarayanan ( India) ................................................ .......... 1
“Three dimensional analysis of electro – magnetic bearings using vector finite element modelling”.
S. Chacko; K. Prabhakaran Nair ( India) ........ .......................................................................... 21
The effect of variation resistance broken bars in induction motor using stator current signature analysis”
A. Menacer; M. S. Nait Said; A. H. Benakcha; S. Moreau; S. Drid ( Algeria – France).. ........... 33
“Fermat, Snell and Hamilton on geometric optics circumstances”. Niel, B. I. (Argentina).. ........... 47
“Modelling of phase shifting regulating transformer for load flow studies”.
U. C. Chukwu; T. C. Nwodo; C. O. Ahiakwo (Nigeria) ........... ................................................ 67

Vol. 78 nº 5
“On – chip coupling noise estimation between parallel wires”.
M. Satar; H. Belahrach; M. Karim; J. Farré (Morocco - France) ...................................... .......... 1
“A digital signal processor based pulse width predictive controlled PWN rectifier with a single stage active power factor corrector to enhance power quality”.
S. Suresh Kumar; V. Subbiah; A. Kandaswamy; S. N. Sivanandam ( India)..................... .......... 17
“Computer simulation of current distribution in low current contacts”. Z. Zlonkiewicz ( Poland) .... 35
“Solving the dynamic dispatch as part of unit commitment problem”.
F. Benhamida; E. N. Abdallah; A. H. Rashed ( Algeria) .................................................. .......... 49
“Reliability of microelectronic devices from emitter – base junction characterisation”.
W. Tazibt; N. Toufik; C. Salamé; P. Mialhe; M. A. Belkhir (France – Algeria - Lebanon) .......... 65

Vol. 78 nº 6
“Analysis of voltage dips and interruptions criterion effect on electrical energy quality”.
C. Fetha; K. Chikhi; A. Dekhinet (Algeria) ................... .............................................................. 1
“Modelling of DC – DC boost converter analysis of capacitor voltage dynamics”.
A. B. Chattopadhyay; S. S. Dubei; A. Bhattacharjee ( India) ...................................................... 15
“Design of knowledge base and sensitivity evaluation of relay sensor for power system protection”.
F. Qureshi; A. Saxena; H. S. Hota ( India) ................................................................................. 25
“Electrical resistivity and microstructure studies of the superplastic Sn-5wt.% bi alloy using
electron diffraction technique”. B. A. Khalifa; M. R. Nagy; R. Afify ( Egypt).................... ........... 41
“An improved experimental setup based on programmable electronics to determine
the transport coefficients of semiconductors”. F. Djeffal; A. Benhaya; M. Chandy ( Algeria)......... 55
“Sequence component impedance based fuzzy fault detection scheme for three phase
induction motor”. V. Duraisamy; N. Devarajan; D. Somesundareswary;
P. Charulatha; S. N. Sivanandam (India) .......................................................................... .......... 71

Modelling B - 2005

Vol. 74 nº 1
“Rotor dynamic coefficients for partially tapered annular seals for compressible flow”.
M. Kamouni; M. Sriti ( Morocco) ............................. ................................................................. 1
“Mathematical modelling of extruder for production of bumper using plastic (s) – polypropylene (PP)”
C. P. Ukpaka; H. A. Ogoni; G. C. Ben (Nigeria)............................................................. .......... 15
“Numerical study of mixed convection heat transfer from thermal sources on a vertical surface”.
D. P. Mishra; T. Desai ( Nigeria) ............. ................................................................................. 31
“Numerical solution of flow and heat transfer of a non – newtonian fluid over a stretching sheet”.
P. R. Sharma; P. D. Ariel; H. Kumar ( India) .................................................................. .......... 45
“New model for ultrasonic velocity with temperature in pure water”.
A. Malaoui; R. Iqdour; M. Ankrim; A. Zeroval; M. Benhayoun; K. Quotb (France - Morocco).. 63

Vol. 74 nº 2
“A three – dimensional object – oriented navier – stokes solver using two –
equation turbulence models”. M. Elkhoury; M. H. Aksel; ( Turkey)..................................... ......... 1
“MHD couette flow with variable physical properties”. H. A. Attia (Saudi Arabia)........... ........... 25
“Kinematical analysis of the macpherson strut suspension system in point coordinates”.
H. A. Attia ( Saudi Arabia) ........................................ ............................................................... 35
“A new technique for the grain burnback analysis in the design of a solid propellant rocket motor”.
C. Yildirim; M. K. Aksel (Turkey) ....... ..................................................................................... 53

Vol. 74 nº 3
“Stokes first and second problems of MHD flow through porous medium”.
P. R. Sharma; Sanjay Kumar ( India) ...................................... ................................................... 1
“Computation of large strains associated wit plastic instability of in – plane loaded plates”.
A. H. Elknoly; M. A. Karkoub; O. M. Al – Hawaj ( Kuwait) .......................................... .......... 11
“On the analytical solutions for a nonlinear coupled pendulum”. S. Donescu ( Romania)..... .......... 21
“Finite element modelling and simulation of contaminant transport in porous media”.
K. Prabhakaran Nair; A. Praveen ( India) ........................ ......................................................... 33
“Hydromagnetic flow past a long vertical channel embedded in porous medium
with transpiration cooling”. R. C. Chaudhary; T. Chand ( India) .................................................. 43
“The diffusion of a solid sphere in a fluid filled spherical shell”.
Bedier B. El – Naggar; Ismail A. Kholeif ( Egypt) ........................................................... .......... 55
“Prediction of the gait stance time from vertical ground reaction force using
artificial neural networks”. R. Begg; A. Zayegh ( Australia) .............................................. .......... 65

Vol. 74 nº 4
“Two fluid magnetoconvection in a vertical enclosure”.
J. C. Umavathi, J. Prathap Kumar; M. Mallikarjun Biradar ( India) ................................... .......... 1
“Finite element modelling of an elliptical journal bearing with micropolar lubricants”.
V. P. Sukumaran Nair; K. Prabhakaran Nair ( India) ..................................................... ........... 19
“An integral equation for the pseudoelastic behaviour of the CuZnAl shape memory alloys”.
M. O. Bensalah; S. Agouram (Morroco) ............ ...................................................................... 35
“Ion slip effect on the unsteady flow of a dusty power law fluid through a circular pipe”.
Hazem Ali Attia ( Saudi Arabia) ................................... ............................................................ 51
“Effect of mass and stiffness on vibrating amplitudes of a double mass double spring
system with damping”. S. Rajan ( India) ............................ ........................................................ 65

Vol. 74 nº 5
“Computer – aided selection of rolling contact bearings”.
T. I. Ogedengbe; A. A. Aderoba ( Nigeria) ...................................................................... .......... 1
“Three dimensional MHD steady flow of a viscous incompressible fluid over a highly porous layer”
Dileep Singh Chauhan; Reema Jain ( India) ................................................................................. 19
“Wind energy offshore farms, review and exploitation”.
C. C. Ohia; S. O. E. Ogbogu (Nigeria) ............................................................................ .......... 35
Numerical modelling of lean CH 4 – air combustion”. D. P. Mishra ( India) ....................... .......... 53
“A new approach in the shape memory alloys”.
A. Alhamany; M. O. Bensalah; O. Fassi – Ferhri (Morocco) ............................................ .......... 63

Vol. 74 nº 6
“Impedance of the liquid – solid interface in the case of non – newtonian fluid flows near
a rotating disk”. A. Benzaoui; S. Skali; M. Saighi; A. Bouabdallah (Algeria - France) .......... ........ 1
“Flow and heat transfer in a inclined channel containing a porous layer sandwiched between
two fluid layers”. M. S. Malashetty; J. C. Umavathi; J. Prathap Kumar ( India)............................ 19
“Application of local interaction simulation approach to the dynamic of periodically layered
elastic media”. S. Donescu; V. Chiroiu; L. Munteanu ( Romania) .................................... ........... 37
“Mathematical modelling of extruder for production of bumper using
plastic (s) – polypropylene (PP)”. C. P. Ukpaka; H. A. Ogoni; G. C. Ben (Nigeria) ....... ........... 49
“Dynamic analysis of multi – area reheat hydrothermal power system with AGC using
decomposition technique”. A. M. Panda; G. Panda ( India).............................................. ...........65
“Ab initio investigation of the mechanism and stereochemistry of electrophílic addition
reaction of bromine to bicyclo (3.2.2) nona -6, 8 - diene”. R. Abbasoglu ( Turkey) ........ ........... 73

Vol. 74 nº 7
“Stability of extensible cable connected satellite system in elliptic orbit”.
R. Narayan; S. Dewagan ( India) ................................................... .............................................. 1
“Stress analysis at the most critical cross sections on the main frames of a tower crane”.
M. Demirsoy; E. Zeren ( Turkey – USA) ........................ ........................................................... 23
“Unsteady free convection MHD flow of a second order fluid between two heated vertical plate
through a porous medium with mass transfer and internal heat generation”.
S. S. Das; S. K. Sahoo; J. P. Panda (India)...................................................................... .......... 41
“Steady laminar flow between a porous rotating disk and a stationary naturally permeable disc”.
P. R. Sharma; U. Mishra ( India) .................... ............................................................................63
“Experimental stud of thermal and mechanical properties of a new insulating material bases
on cork and cement mortar”. A. Khabbazi; M. Garoum; O. Terhmina ( Morocco)............ .......... 73

Vol. 74 nº 8
“Laminar flow of elastic – viscous fluid through porous parallel plates with suction and
infection, the lower plate being stretched”.
S. S. Das; S. K. Sahoo; G. C. Dash; J. P. Panda (India) .................................................... .......... 1
“Development of mathematical models for the teological test, velocity distribution
and the flow rate characteristics of crude oil flowing through a tube of various radii”.
C. P. Ukpaka; H. A. Ogoni; P. N. I Ikenyiri (Nigeria) ..................................................... ........... 23
“Implementation and comparison of turbulence models on a flat plate problem using
a navier – stokes solver”. B. Ziya Genç; M. Haluk Aksel ( Turkey) ................................... .......... 43
“On the mechanical behaviour of carbon nanotubes with single – atomic – layer walls”.
L. Munteanu; C. Chiroiu ( Romania - Italy) .......... ....................................................................... 65

Modelling C - 2005

Vol. 66 nº 1
“An analytical model to study the dynamic oxidation of graphite at high mass transfer rate in the
diffusion controlled regime”. A. Benhaya; B. Granier ( Algeria - France).............................. .......... 1
“Effects of manure and mulching on soil properties, growth and yield of late – season tomato (lycopersicon esculentum, mill.) in the humid south of Nigeria”. S. O. Agele ( Nigeria)........ .......... 17
“Effect of gas sparging on the mass transfer rate at the surface of a cylinder”.
O. A. Fadali ( Egypt) ....................................................................................................... .......... 35
“Telemetry based system fro measurement and monitoring of biomedical signals”.
Aman Al – Imari; Kasim Rashid; Mohammed Al – Dagstany ( Jordan - Libya).................. .......... 47
“Sedimentological studies on the Nile delta beach pebbles, Egypt”.
K. N. Sediek; A. A. Badr ( Egypt) .................................................................................. .......... 57
“Monitoring and evaluation of burullus and baltrim sea resort protection works
& environmental impact”. A. I. El - Kolfat ( Egypt) ........................................................... ......... 73

Vol. 66 nº 2
“Optimal control of fluidized catalytic cracking unit using artificial neural network”.
D. Manamalli; P. Kanagasabapathy; D. Vasanthi ( India)............................................................... 1
“Analytical evaluation of lung diffusivity”.
B. B. El – Naggar; I. A. Kholeif ( Egypt) ........................................................................ ........... 19
“Computer aided analysis of corrosion monitoring in nigerian petroleum industries”.
O. D. Adeniyi; O. A. Olugboji; M. S. Abolarin (Nigeria)................................................. ........... 29
“Photooxigenation on some polyaromatic hydrocarbons presists (POPS)”.
E. M. Elgendy ( Egypt) ............................................................. ................................................. 41
“Evaluation of the surface and groundwater resources of Efuru river catchment, Mbano,
south eastern Nigeria”. U. U. Egereonu; U. L. Nwachukwu ( Nigeria) ............................. ........... 53

Vol. 66 nº 3
“Linear state – space model of physical process in a tipe – 1 diabetic patient with closed loop
glucose regulation”. A. Sutradar; A. S. Chaudhuri (India) .................................... ............. .......... 1
“Prophylactic effect of liquid extract telferia occidentals in the prevention of painful sickle cell crisis”.
P. C. Njoku (Nigeria) ..................................................................................................... .......... 19
“Evaluation of pretreatment methods for the frying of potatoes and their effect on the quality”.
H. A. Moharram; S. Y. El – Faham; M. F. Salama (Egypt).............................................. .......... 29
“Simulation of hydrologic flood routing for downstream of Jebba dam using muskingum technique”.
Salami, A. W.; Ajiboye; V. O.; Ayanshola; A. M.(Nigeria)............................................. ........... 49
“Modelling of wastewater treatment process in the class of distributed parameters objects”.
T. Pencheva; I. Hristozov ( Bulgaria - Sweden) ...... ................................................................... 63
“Ab onitio molecular orbital study on the electrophilic addition of chlorine and bromine
to bicyclo (2.2.2) octa – 2,5 - diene”. Rza. Abbasoglu ( Turkey)...................................... .......... 77

Vol. 66 nº 4
“Investigation of microbial influenced corrosion in crude oil storage tanks”.
C. P. Ukpaka (Nigeria) ................................................................................................... .......... 1
“Evaluation and modelling of effluent from electroplating plant”.
O. D. Adeniyi ( Nigeria) ................................................................................................ ........... 23
“Design and implementation of a reconfigurable defibrillation system”.
A. Zayegh; R. Begg; H. Mahdavian ( Australia) ............................................................. ........... 39
“Determination of heavy metal toxicant in fish samples from Aba river”.
I. J. Alinnor ( Nigeria) ................................................................................................... ........... 51
“Design of a high rate anaerobic digester for the production of methane – A case study
of Port – Harcourt municipality ( Nigeria)”. H. A. Ogoni ( Nigeria).................................. ........... 71

Vol. 66 nº 5
“The investigation of the synergetic properties of neuron network regulating the pulse rate
according to compartmental approach”. V. M. Eskov; V. V. Eskov ( Russia).................... .......... 1
“Effect of some cultural conditions, pesticides and consolidators on growth and
enzyme activity of trichoderma viride”. S. A. Ismail; A. F. Sahab; S. A. Darwish ( Egypt). .......... 17
“Distribution and speciation of some heavy metals in an industrial wastewater discharge area, Egypt”
Mohamed Attia Shriadah; Safaa Abd El Salam Hassan ( Egypt) ...................................... .......... 31
“Fuzzy techniques and fuzzy aggregation operators for classification of epilepsy risk level
using EEG signal parameters”. R. Harikumar; R. Sukanesh; B. S. Narayan ( India)........... .......... 43
“A knowledge – based system for paediatric fever management accessible through world wide web”.
S. K. Datta; R. K. Samantha ( India) .............................................................................. .......... 63
“Development of an expert system for the prediction of carpal tunnel syndrome risk
in an occupational environment: CAREX”. S. U. Seckiner; M. Kurt ( Turkey).................. .......... 75

Vol. 66 nº 6
“LP model formulation of the aviation gasoline problem”. P. O. Ekoko (Nigeria)................. .......... 1
“On constructing leaf rectangularity index by bootstrap regression”. I. Didi Essi ( Nigeria) . ........... 13
“Biomass production and partitioning in Early and late season tomato, in the humid south of Nigeria”.
S. O. Agele ( Nigeria) ............................. ................................................................................... 23
“An artificial neural network base model to predict sulphur dioxide emission”.
R. Mahanti; V. Bhattacherjee; S. K. Mukherjee ( India) ......... .................................................... 43
“Deterministic model for predicting gaseous pollutants concentration: an effective tool
for pollution monitoring”. J. O. Odigure; B. O. Aregbesola ( Nigeria) ............................... ........... 55
“Classification of ventricular tachycardia and fibrillation by detrended fluctuation analysis”.
Hai Huang; Hongbo Xie; Zhizhong Wang (P. R. China) ................................................... ........... 79

Modelling D - 2005

Vol. 26 nº 1
“Inventory model for a product of a multi – national with – without defective production process”.
N. K Mahapatra; T. K. Roy; M. Maiti ( India) .................................................................. .......... 1
“An approach to development of computer integrated manufacturing and management systems”.
J. B. Lewoc; S. Skowronski; A. Izworsk ( Poland)........................................................... .......... 21
“A fuzzy analytic hierarchy process and its application in the evaluation system
of cognition ability of students”.
Ma Xiaoyan; Miao Yuanzhen; Zhang Wei; Gao Decheng (P. R. China)............................. .......... 33
“Multi – objective inventory model of deteriorating items under investment and order constraints”.
ahidul Islam; Tapan Kumar Roy ( India) ........................................................................... .......... 43
“Reducing archives to build non – linear models using neural networks”.
G. A. Colomenares L. ( Venezuela) ................................................................................. .......... 63

Vol. 26 nº 2
“Job sequence modelling using genetic algorithms”.
S. N. Sivanandam; M. Kannan (India) ............................................................................... .......... 1
“An adaptive neuro – fuzzy inference expert system to enhance concurrency control mechanisms”.
M. Qutaishat ( Jordan) .................... .. ....................................................................................... 15
“Appraisal of loan disbursements under the agricultural credit guarantee scheme (ACGS)
in Imo State Nigeria”. N. N. O. Oguoma ( Nigeria ) ...... ............................................................ 33
“Shelf – space allocation for two – items via genetic algorithm”.
M. K. Maiti; M. Maiti ( India) ........................................................................................ ........... 53
“Habitual domains and their extension directions based on matter element theory”.
Yang Guowei (P. R. China) .......................................... ............................................................. 71
        
 Vol. 26 nº 3                                                                                      
-    “User modelling. A review”.
O.A.Sennaike; A.K.Ojo; A. B. Sofoluwe (Nigeria)     ................................................................1
-    “The framework of a web-enabled group decision support system for mass customisation”.
H. Huang; L. Wang (P. R. China)     .........................................................................................11 
-    “Interactive fuzzy linear programming approach in design of multiobjective cellular manufacturing system”. D. Patel; U. C. Ray (India)    .......................................................................................27
-    “Iris recognition system in security environment”.
D. J. Munisekhara Reddy; A. Sukesh Kumar (India)...................................................................41
-    “Determinants of egg production in Kwara, State”.
Olorunsanya, E. O.; O. A. Omotesho; M. O. Adewumi (Nigeria) ...............................................61
-    “Determination of optimum number of tankers in a petroleum distribution problem”.
P. O. Ekoko (Nigeria) ...............................................................................................................71

Vol. 26 nº 4                                                                                       
-    “Education as human capital. Considerations relative to Spain”.
 Armando Villamil Serrano (Spain) ...............................................................................................1
-    “Analysis of speculation and risk attitude in securities market”.
 L. M. Jiang (P. R. China) ..........................................................................................................17
-    “Performance evaluation case study: a computer integrated manufacturing and management system”.
 J. B. Lewoc; A. Izworsk; S. Skowronski (Poland) .....................................................................27
-    “Cereals and farming household food security in kwara State, Nigeria”.
 A. Muhammad-Lawal; O. A. Omotesho (Nigeria) ......................................................................43
-    “Markov chain model for ascertaining the spread of HIV among the intravenous drug users (IVDU)”. P. Ekoko; O. Igbinosa (Nigeria) ..................................................................................57
-    “On feature selection for feed forward multilayer perceptions (MLPs)”.
 A. K. Ojo; A. B. Sofoluwe; O. A. Sennaike (Nigeria) .................................................................67