CONTENTS

Advances A-2006

Vol. 43 nº 1
“Existence of the solution for the functional equation in dynamic programming”. G. Panda ( India) ......1
“Sensitivity coefficients in the bolts problem for multivariate dynamic systems described by integro-differential equations with dead time”. A. I. Rouban ( Russia) ...........................................................15
“Generalized extension language and generalized extension grammar”.
Yang Guowei; Lai Yixin ( China) ......................................................................................... ...........35
“Polynomial fractional programming optimization”. N. M. Badra ( Egypt) ............................... ..........57
“An improved legendre moment descriptor (ILMD) as contour-shape descriptor”.
V. P. Dinesh Kumar; Tessamma Thomas ( India) .................................................................. ..........71

Vol. 43 nº 2
“Stone topology of the set of prime filters of a pseudo-complemented semi-lattice”.
P. Balasubramani; R. Viswanathan ( India) .............................................................................. ..........1
“Research on decomposition of fuzzy error set”. Li Min; Guo Kaizhong (China) ..................... ..........15
“The distribution of loads in polar coordinates”. K. Chikri; R. Addessamed (Algeria) ............ .......... 27 “Cluster detection and characterisation based on unsupervised fuzzy learning”.
A. Bouromi; M. Benrabh; A. Rodouane; A. Hamdoun (Morocco) ...................................... ........... 39
“Tolerance approach to sensitivity analysis in multiobjective linear programming”.
N. M Badra ( Egypt) ........................................................................................................... ...........57
“On fuzzy-2 metric space”. A. Tamilarasi; P. Balasubramanie; R. Viswanathan (India) ............ ......... 69

Advances B-2006

Vol. 49 nº 1
“Design and development of efficient fuzzy logic based selective controller for performance improvement of synchronous generator”. G. Kaur; Y. Singh ( India) ........................................................... ..........1
“Fusion of multi-spectral and panchromatic images by complex steerable pyramids”.
Shutao Li ( China) ............................................................................................................... ..........13
“Performance of differential quadrature phase shift keying with dual switched diversity reception over independent and correlated nakagami-m fading channels”.
S. Sri Gowri; B. Prabhakara Rao; P. V. Subbiah (India) ....................................................... ..........23
“Clarity random for digital images based on focus measures”. Shulao Li ( China) ................... ..........37
“Colour image compression using clustering technique in counter propagation network”.
R. Shanmugalakshmi; S. Annadurai ( India) .......................................................................... ..........53
“Multisensor robust H 4 decomposed-composed (D-C) fusion estimation”.
X-B Jin; Y-X Sun ( China) ................................................................................................... ..........71

Vol. 49 nº 2
“Dynamic modelling of on off-machine paper coater using recurrent neural network”.
P. Gandikota; S. Renganathan ( India) ................................................................................... ..........1
“A low cost implementation neural network using field programmable gate array”.
W. A. Mahmoud; D. R. Zhaghar; A. A. Hassan ( Iraq) ....................................................... .......... 17
“An algorithm for pitch period detection in mixed excitation linear predictive (MELP) vocoder system”. W. A. Mahmoud; Wissam A. Al Bawi ( Iraq) ...................................................................... ..........29
“Texture classification with orthogonal moment features”.
V. Subbiah Bharathi; V. Srinivasa Raghavan; L. Ganesan (India) .......................................... ..........49
“Modelling and simulation of extensible cable-connected satellites system in low altitude orbit”.
A. Narayan; B. Sharma ( India) ............................................................................................ .........61

Vol. 49 nº 3
“Double spatial coding technique for image compression”.
V. Srinivasa Raghavan; V. Subbiah Bharathi; L. Ganeasan (India) ......................................... ..........1
“Prediction based smart scheduler using neural network for wireless networks”.
K. Jayanthi; P. Dananjayan ( India) ..................................................................................... ..........13
“Hiding image data in images using random insertion algorithms”.
K. N. El Sayed ( Saudi Arabia) .......................................................................................... ..........25
“Dynamic shaping of harmonics for simulating and active playing of multiple musical instruments in PC”. K. Balasubramanian ( Turkey)............................................................................................. ..........39
“A new steganography algorithm for text hiding in the frequency domain”.
Mohammed Mustafa; Moh’d Belal Al-Zoubi (Jordan) ......................................................... ..........53
“The Takagi-Sugeno fuzzy systems for modelling daily insulation”.
R. Iqdour; A. Zeroval ( Morocco) ...................................................................................... ..........67

Vol. 49 nº 4
“Facial recognition system: new classifier scheme based on the cluster-value and the K-nearest neighbourhood”. S. Serhan; M. Abdallah; M. Naura ( Jordan) .............................................. .......... 1
“Estimation of azimuth/elevation angles using neural networks”.
W. A. Mahmoud; A. S. Hadi ( Iraq) ................................................................................... ...........21
“Interactive balance space approach for solving bi-level multi-objective programming problems”.
M. A. Abo-Sinna; I. A. Baky ( Egypt) ................................................................................ ...........43
“A modified fuzzy texture spectrum based edge detection for colour texture images”.
G. Wilselin Jiji; L. Ganesan ( India) ..................................................................................... .......... 63
“Page segmentation using morphological operations”. S. Li; Q. Shen (China) ...................... ........... 75

Advances C - 2006

Vol. 61 nº 1
“Improved PID controller using fuzzy precompensated algorithm for PMBLDC motor drive”.
K. Kumar; A. K. Singh; P. K. Bordoloi ( India) ...............................................................................1
“An evolutionary approach for model reduction in linear time invariant discrete systems”.
S. N. Sivanandam; J. Suganthi; R. Venkatesan ( India) ........................................................ ..........17
“H 4 – optimal control with differential games for optimal decentralised control”.
I. A. El – Shahat ( Egypt) .................................................................................................... ..........33
“A unified approach for model order reduction in delta domain”. P. Sarkar; J. Pal (India) .... .......... 43
“Zero tracking and stability analysis of multirate sampled-data feedback control systems”.
Xiao Jian; Chen Tanglong; Huang Yanquan ( China) ............................................................ ..........63
“Global exponential stability of delayed fuzzy control systems”. Wenlin Li; Juntao Li ( China) .......... 79

Vol. 61 nº 2
“Formulation of a second order system using rule based error minimisation technique for linear time invariant continuous systems”. S. N. Sivanandam; R. Vakantesan; J. Suganthi (India).............. .......... 1
“Sliding mode controller for robust force control of hydraulic servo-actuator”.
J. Boumhidi; M. Mrabti ( Morocco) ................................................................................... ........... 23
“Adaptive fuzzy control of reversible rectifier feeding PMSM with improved power factor”.
M. T. Benchovia; A. Golea; S. E. Zouzou; A. Ghamri (Algeria) .......................................... ........... 33
“Development of an advanced controller for improved performance of a permanent magnet brushless DC Motor”. S. Ushakumari; R. Sankaran ( India) ............................................................... .......... 45
“A novel method for multivariable system reduction”.
T. Manigandan; N. Devaranjan; S. N. Sivanandam ( India) ................................................. ...........63
“Design of IMC-PID controller using symbolic algebra”.
K. J. Poornaselvan; S. Palaniswami; A. Balamurugan; S. N. Sivanandam ( India) ................ ...........79

Vol. 61 nº 3
“A high frequency low voltage current voltage controlled oscillator using modified emitter coupled logic (ECL) inverters”. S. Sahu; S. Chandra; B. Chkrabartry; R. R. Pal ( India) ............................. ..........1
“Time optimal control of a omni-directional mobile robot”.
A. Ouddhaï; S. E. Rebian ( Algeria) .................................................................................... ..........21
“Design of PID Controller using symbolic algebra”.
K. J. Poornaselvan; P. Kavitha; N. Devarajan; S. N. Sivanandam (India) ............................ ..........35
“Identification and fault simulation in deaerator”.
S. Srinivasan; P. Kanagasabapathy; N. Selvaganesan ( India) .............................................. ..........47
“Sensor less V/f Control of PWM Inverter-Fed Induction machine using back stepping and k-filter technique”. S. Ekram; B. Sarkar ( India) .........................................................................................59
“Null controllability of nonlinear integrodifferential systems with delays”.
R. A. Umana; C. A. Nse ( Nigeria) ..................................................................................... ..........73
“Development of a unified model to study transient and steady state response of static VAR compensators”. S. Nath; A. Chakrabarthy; A. K. Mukhopadhyay ( India) ........................... ..........85

Vol. 61 nº 4
“Suboptimal control using reduced order model”.
T. Manigandan; N. Devarajan; S. N. Sivanandam (India) ...................................................... .......... 1
“New results on active identification and control for nonlinear discrete time output feedback systems”. N. Selvaganesan; S. Renganathan ( India) ............................................................................ ..........19
“A comparative test study of simple PI controllers for multivariable systems”.
C. Selvakumar; M. Bharathi; R. C. Panda ( India) ................................................................ ..........31
“Active vibration control of a flexible structure using optimal control and piezoelectric actuators”.
J. Fei; Y. Wang ( USA) ........................................................................................................ .........51 
“An evolutionary approach for second order model formulation of multivariable linear time invariant continuous systems”. S. N. Sivanandam; J. Surganthi; R. Venkatesan ( India) ......................... .........61
“Dynamic model and variable structure control for flexible fuel-filled spacecraft”.
D. L. Peng; A. K. Xue( China) .............................................................................................. .........77
“A simple algebraic scheme for model reduction in linear time invariant systems (ITIS)”.
S. N. Sivanandam; J. Surganthi; R. Venkatesan ( India) ......................................................... .........89

Advance D-2006

Vol. 11 nº1
“Genetic algorithms inspired cryptography”.
A. Tragha; F. Omary; A. Kriovile (Morocco) ...................................................................... ..........1
“Applying the model-based approach for providing security services in smart card environment”.
S. N. Sivanandam; G. R. Karpagam ( India) ....................................................................... ..........13
“Sidelobe cancellation using padé approximation technique”.
K. Raja Rajeswari; M. Uttara Kumari (India) ...................................................................... ..........31
“Improving Q oS good put in hostile mobile ad-hoc networks”.
A. Helweh; R. Jabri (Jordan) .............................................................................................. .......... 41
“Automatic generation of user interfaces based on extended object model”.
J. Wan; X. Lu ( China) ........................................................................................................ ..........55
“Relevancy and approximate string matching”. M. M. Mhashi ( Jordan) ...........................................67

Vol. 11 nº2
“Network fault diagnosis using conversational case-based reasoning”.
S. Baddar; S. Serhan; K. El Hindi ( Jordan) ........................................................................... ..........1
“Solving some exponential and poisson distribution inverse problems by special transduction theory”.
S. Bauk; S. Perovich ( Serbia & Montenegro) ...................................................................... ..........19
“Allowing for natural language information retrieval by incorporation of bayesian semantics to web content”. M. Maragoudakis; A. Garmpis; C. Tegas ( Greece) ............................................... ..........37
“Design and implementation of an information system using the object-relational database approach”.
O. Owolabi; B. B. Baridam ( Nigeria) .................................................................................. ...........49
“Document reprocessing for keyword-based retrieval”.
O. Owolabi; C. B. Ndeekor ( Nigeria) .................................................................................. ..........61
“An object-oriented design of RSA cryptosystem for E-governance environment”. Siddhartha Sen; Sripati Mukhopadhyay; Sunil Karforma ( India) ..................................................................... .........69

Vol. 11 nº 3
“Maintenance tool for object-oriented programs using concepts lattice”.
H. J. Fawareh; H. A. Ali ( Jordan) .......................................................................................... ..........1
“Fast block-based motion estimation using uniform design technique”.
N. Benmousat; M. F. Belbachir; M. Zerikat ( Algeria) ........................................................... ..........21
“Generating SQL query from natural arabic request”. K. N. El Sayed ( Saudi Arabia) ............ ..........31
“Modelling and simulation of neural assisted successive inference canceller: a novel approach”.
B. Sivakumar; S. Subha Rani; A. Shanmugam ( India) ........................................................... ..........43
“An emphasis on the need for IDE/ITE. A step ahead into the modelling technology”.
G. R. Karpagam; S. N. Sivanandam (India) .......................................................................... ..........55
“An efficient educational encryption algorithm ”. A. Nsour; S. Abdul-Rub. ( Jordan) .........................71

Vol. 11 nº 4
“Cluster analysis using fuzzy c-means technique for data mining from library information system and its neural verification”. M. F. Qureshi; R. P. Bajpai; A. Saxena; P. L. Khande (India) ................. .......... 1
“Studies on the estimation of two unknown population means”.
S. C. Senapati; L. N. Sahoo (India) ................................................................................... ........... 19
“Design of fuzzy rule-based classifier for data mining from library data warehouse using EMO algorithm”. M. F. Qureshi; R. P. Bajpai; A. Saxena; P. L. Khande (India) ........................... ........... 31
“Fuzzy tolerance approach in probabilistic multiobjective programming problems”.
N. M. Badra ( Egypt) ......................................................................................................... .......... 43
“Construction diversion risk analysis on combine discharge of bottom outlet and Dam-Gap”.
Zhigen Hu; Xi-e Fan; Quan Liu; Sen-quan Xu; Julin He (China) .......................................... ........... 55
“Cumulant structure for the bilinear multiplicative seasonal ARIMA (O, D, O x (1, D, 1) s time series model”. I. Iwueze; D. Chikezie ( Nigeria) ............................................................................ ........... 71

Modelling A - 2006

Vol. 79 nº 1
“Fault diagnosis of linear analog circuits in frequency domain”.
V. Manikandan; N. Devarajan; K. Ramakrishnan ( India) ........................................................ ..........1
“Modified back propagation algorithm for incipient fault detection in three-phase induction motor”. V.Duraisamy; N. Devarajan; D. Somesundareswary; S. N. Sivanandam ( India) ..................... .........15
“A critical approach of szilard’s model on the resolution of the maxwell’s demon problem”.
A. S. Move; K. A. Masavetas; H. S. Karayianni ( Greece) ......................................................... ....27
“Effect of austempering time and temperature on structure and properties of unalloyed ductile iron”.
B. P. Kumar; K. C. Bala; R. H. Khan (India-Nigeria)............................................................ ..........41
“Performance optimization of CMOS circuits using retiming algorithm with stepwise charging”.
P. Vijayakumar; K. Gunavathi ( India) .................................................................................. ..........55
“Novel calculation procedure for the determination of series capacitance for transient analysis of windings”. Lj. M. Popovic; I. Lj. Popovic (Serbia-Montenegro)............................................. ..........69

Vol. 79 nº 2
“Preparation of low cost asphalt paving mixture”. A. M. M. Saleh ( Egypt) ............................. .......... 1
“Magnetic coupled L-R oscillators”. A. Al-Imari; A. Abdel-Qader (Jordan) ........................ ........... 13
“Preparation of ceramic tool materials containing rare earth additive”.
Chonghai Xu ( China ) ........................................................................................................ ........... 25
“Thermal equalization HPWM methods for full-bridge inverters and energy loss balancing through device priority swapping”. S. Jeevananthan; P. Dananjayan; K. Murugesh Kumar ( India) .... ........... 35
“Conducted noise estimation in a single-phase full-bridge inverter for SPWN, HPWN, and TEHPWN methods through ICAP simulation”. S. Jeevananthan; P. Dananjayan; G. Jaiganesh ( India) .. ........... 53
“Power loss analysis in high frequency quasi-resonant DC link power conversion for induction heating application”.
A. Allag; A. Hadri Hamida; S. M. Mimoune; S. Zerovali; M. Féliachi (Algeria-France) ....... ........... 73

Vol. 79 nº 3
“A solution method to economic dispatch using the matlab function (FMINCON)”.
F. Benhamida ( Algeria) ......................................................................................................... ..........1
“Mathematical modelling of extruder for production of bumper using plastic (s)-polypropylene (PP)”.
C. P. Ukpaka; H. A. Ogoni; G. C. Ben (India) .................................................................... .......... 15
“Transition from an inset-fed rectangular patch antenna to a probe-fed rectangular patch antenna, modelling and analysis”. A. Latif; A. Oulad-Said; A. Ait Ouahman ( Morocco) ...................... ..........31
“A novel wavelets based testing method for analog VLSI circuits using pseudo-random patterns”.
P. Kalpana; K. Gunavathi ( India) ......................................................................................... ..........47
“Efficient waveguide bend design in photonic crystal by using the topology optimisation”.
L. Dekkiche; R. Naoum ( Algeria) ........................................................................................ ..........61
“Push-pull topology for high voltage switching power supply system”.
M. Deben Singh; K. Kumar ( India) ..................................................................................... ..........73

Vol. 79 nº 4
“Electrical resistivity of liquid metals from a charged-hard-sphere reference system in the optimized random phase approximation”. F. Matthew-Ojelabi ( Nigeria) ................................................ ..........1
“A new reference algorithm based on positive sequence and instantaneous power for a series active power filter”. H. Benalla; H. Djeghloud ( Algeria) ................................................................. ..........13
“Coordinated control design of generator excitation and SVC transient stability of power system using adaptive fuzzy control”. B. Bouchiba ( Algeria) ..................................................................... ..........31
“CMOS current steering D/A converter with gradient error compensation”.
Y. He; J. Jiang; Y. Sun (China-U.K) ................................................................................... ...........47
“Dielectric coating microstrip leaky-weave antennas analysis”.
Z. Mekkiovi; H. Baudrand (Algeria-France) .......................................................................... .........63
“Flip-flops for low power and high speed performance”.
H. Mangalam; K. Gunavathi (India) ...................................................................................... ......... 75
“Energy efficient charge recovery for positive feedback adiabatic logic”.
P. Vijayakumar; K. Gunavathi ( India) ................................................................................... .........87

Modelling B - 2006

Vol. 75 nº 1
“A study of two-dimensional unsteady dusty fluid flow under varying pressure gradient”.
B. J. Gireesha; C. S. Bagewadi ( India) .................................................................................. ..........1
“Active vibration suppression of a flexible structure using strain rate feedback control and piezoelectric actuator”. J. Fei; Y. Fang ( USA) ........................................................................................... .........11
“Inverse kinematics simulation of redundancy robot”. Y. Wang; X. L. Wang ( China) .............. .........23
“A dynamic study of a foot-to-floor interaction during a vertical jumping”.
S. Boukhenous; M. Attari; N. Ababou ( Algeria) ................................................................... ..........41
“Modelling and real-time vibration control of a flexible structure using piezoceramic actuators”.
J. Fei; Y. Fang ( USA) ......................................................................................................... ..........51
“Spatially discrete approximations of problems in damage mechanics”.
E. A. Ibijola; F. Matthew-Ojelabi ( Nigeria) ......................................................................... ..........65

Vol. 75 nº 2
“Free convective and mass transfer flow of a viscous incompressible fluid thought a porous medium in the presence of source sink with constant suction and heat flow”.
S. S. Das; S. k. Sahoo; G. C. Dash; J. P. Panda (India) ......................................................... .......... 1
“Steady MHD boundary layer flow and heat transfer between two long vertical wavy walls”.
P. R. Sharma; G. R. Yadav ( India) .................................................................................... ........... 21
“The effect of support arm condition on the displacement and stress of tower crane main frame”.
M. Demirsoy; E. Zeren (Turkey-USA) ............................................................................... ........... 37
“Unsteady flow and heat transfer along a hot vertical porous plate in the presence of periodic suction and heat source”. P. R. Sharma; I. Gupta ( India) ................................................................ ........... 61

Vol. 75 nº 3
“Convective two-fluid flow through a vertical channel”.
J. C. Umavathi; M. H. Manjula (India) ................................................................................... .......... 1
“Effects of the Earth magnetic field and tidal force on oscillations of cable-connected satellites system in elliptical orbit”. A. Narayan; B. S. Narang ( India) .................................................................. .........19
“Free convection of conducting viscous fluid between two vertical walls filled with a porous material”.
J. P. Panda; A. B. Patnaik; A. Acharya ( China) .................................................................... .........31
“Multi-block navier-stokes solver for solid propellant rocket motors”.
E. Erdogan; M. H. Aksel; H. T. Tinaztepe ( Turkey) ............................................................. ..........45
“Solutions with orthogonal velocity and magnetic fields”.
Siddabasappa; C. S. Bagewadi; B. J. Gireesha (India) ......................................................... .......... 65

Vol. 75 nº 3
“Calculation of the distribution speeds in a perfect fluid by the method of the singularities”:
A. El Hamss; M. El Mammouti ( Morocco) .......................................................................... .......... 1
“Dynamic and heat transfer study of a pulsating axial flow around an obstacle in a periodical rotating motion”. A. Ghezal; Z. Ouchiha; M. Saighi; B. Porterie; J. C. Loraud (Algeria-France) ....... ........... 23
“MHD flow and heat transfer of a viscous electrically conducting fluid past a stretching sheet
through a porous medium”. S. S. Das; S. K. Sahoo; G. C. Dash ( India) ............................. ........... 41
“Hydromagnetic unsteady free convective flow and mass transfer of an elastico-viscous fluid past an infinite vertical porous plate in rotating porous medium”.
J. P. Panda; S. S. Das; A. B. Pattnaik; P. R. Satpathy ( India) ............................................ ........... 57
“An approach on special transfunction theory base on the conductive fluid high level estimation”.
S. M. Perovich; S. I. Bauk ( Montenegro) .......................................................................... ........... 75

Vol. 75 nº 5
“Fuzzy based study and simulation of local heat transfer coefficient at circumference of horizontal tube in free board region of fluidized bed”. M. F. Qureshi; I. C. Bharti ( India) ................................... ..........1
“Modelling the thermal conductivity of porous moist material”. A. Chaker ( Algeria) .............. ..........21
“Three dimensional corvette flow with transpiration cooling through porous medium in slip flow regime”. N. C. Jain; P. Gupta; B. Sharma ( India) .............................................................................. ..........33
“Numerical simulation in labyrinth seals with lagrangian-eulerian method for incompressible flow”.
M. Sriti, L. Boukrim; M. Cherkaovi; M. Kamouni (Marocco) ............................................. .......... 53
“Sliding mode control of a flexible beam using piezoceramic actuators”. J. Fei; Y. Fand ( USA) .......63
“Modelling and adaptive vibration control of a flexible cantilever beam”. J. Fei; G. Sang ( USA) ......71

Vol. 75 nº 6
“Object-oriented approach for the solution of the navier-stokes equations”.
U. Haliloglu; M. H. Aksel ( Turkey) ..................................................................................... .......... 1
“Fuzzy reasoning based seismic shear design of reinforced concrete structural wall”.
M. F. Qureshi; R. K. Gabel; H. S. Hota (India) .................................................................. ........... 21
“Transmissible and reflective SH wave response in laminated composite material”.
M. Louzar; Y. Chevalier; A. Lahrouni (Morocco-France) ................................................... ........... 37
“Thermally developing hartman flow in a channel of uniform width”.
O. D. Makinde; P. Y. Mhone ( South Africa) ..................................................................... ........... 49
“Implementation of one-equation turbulence models into a navier-stokes solver”.
M. N. Musta; M. H Aksel ( Turkey) ................................................................................... ........... 61

Modelling C - 2006

Vol. 67 nº 1
“Treatment of replicate measurement in kinetic studies”.
J. O. Omolehin; F. A. S. Fabiyi (Nigeria) ............................................................................... .......... 1
“Phisico-chemical properties of roasted lime fruit as spices and hot drink”.
S. A. Salem; B. E. Mostafa; H. A. Moharram ( Egypt) ......................................................... ..........13
“Predictive model of pollutants deposition and diffusion in cement based structure”.
A. Jimoh ( Nigeria) ............................................................................................................... ..........29
“A comparison of elman and PML feed forward neural networks for classification of epilepsy risc levels from EEG signals”. R. Harikumar; R. Sukanesh ( India) ......................................................... ..........43
“Modelling the microbial thermal kinetics system in biodegradation of n-paraffins”.
C. P. Ukpaka ( Nigeria) ....................................................................................................... ..........61

Vol. 67 nº 2
“On the dissolution of hydrated alumina in concentrated solution of sodium hydroxide”.
M. Stankovix; L. Pezo; B. Kovacevic; M. Jovanovic; D. Debeljkovic ( Serbia and Montenegro) ....... 1
“Hydrolytic enzimes activity resulting into antibiotic production by specific strain of streptomyces
griseus using different natural oils and fatty acids”.
K. Y. I. El-Shahed; A. El-Monaem; M. El-Nakkadi; H. M. Awad (Egypt) ........................... ...........11
“The effect of concentration and pH of some anion solution on surface charge of manganese dioxide”. D. F. Aloko; K. R. Onifade ( Nigeria) .................................................................................. ...........27
“Biokinetics for the production of nitrogen from natural aquatic ecosystem polluted with crude oil”.
C. P. Ukpaka; E. O. Oboho ( Nigeria) ................................................................................. ..........39
“Microbial growth and decay rate kinetics on biodegradation of crude oil”.
C. P. Ukpaka ( Nigeria) ...................................................................................................... ...........59
“Empirical prediction of weight loss in stored yam”.
Z. D. Osunde; M. G. Yisa; A. M. El-Okene (Nigeria) ......................................................... ...........77

Vol 67, supp: Handicap - 2006
“ARPH: Comparison of a classical method and a method using man-machine collaboration to exploit the redundancy of the robotized assistant”.
S. Delarue; K. Nait Chabane; P. Hoppenot; E. Colle ( France) ..........................................................1
“Efficassouris: an assessment tool for the use of input pointing devices by people with motor disabilities”. P. Foucher; O. Grynszpan; A. Adameczek; T. Choquet; K. C. Huynh; C. Lefur;
J. Lopez Krahe (France) ....................................................................................................... ..........12
“Study of the performances during a task of text input with soft keyboards: first characterization of fatigue”: F. Vella; N. Vigouroux ( France) ............................................................................. ..........22
“Coefficient of cognitive performance (CCP): parameter selection for visual aids”.
A. C. Scherlen; V. Gautier ( France) .................................................................................... ..........33
“Theoretical comparison of the resultant braking force applied on a manual wheelchair within a propulsion cycle on the field and on laboratory ergometers”.
C. Sauret, N. de Saint Rémy; Ph. Vaslin; M. Cid; M. Dabonneville; Ph. Kauffmann ( France) ..........43
“Haptic feedback to assist powered wheelchair piloting”. M. Sahnoun; G. Bourhis ( France) .............53
“EVACOG-Virtual environments for cognitive sciences”.
P. Richard; P. Allain ; F. X. Inglese ; E. Richard ; D. Gall ( France) ....................................... ..........64
“Concept of the walking cognitive assistance: experimental validation”.
E. Pissaloux; F. Maingreaud; R. Velazquez; E. Fontaine ( France) ......................................... ..........75
“Designing a navigation aid for a smart wheelchair”.
D. R. Mestre; J. M. Pergandi; P. Mallet (France) .................................................................. ..........86
“Evaluation of ASSR response for cochlear implant fitting”.
M. Ménard; L. Collet; C. Berger-Vachon (France) ............................................................. .......... 96
“Intelligent interface for robot object grasping”.
C. Leroux ; I. Laffont ; S. Schmutz ; N. Biard ; R. Gelin ; G. Chalubert ; Y. Méasson (France) ......106
“Measurement and analysis of the evolution of soft tissue volume of lower limbs in hemiplegic patients using MRI”. P. Hédoux; A. Pinti ( France) .......................................................................... ..........116
“Virtual agent for deaf signing gestures”. S. Gibet; A. Héloir; N. Courtry; J. F. Kamp; N. Rezzoug;
P. Gorce; F. Multon; C. Pelachaud (France) ....................................................................... ..........127
“Biomechanical analysis of the movement of prehension with obstacle: comparative study between elderly subjects and adults”. M. Geronimi; P. Gorce ( France) ............................................. ..........137
“Ergonomic assessment of the handcyding propulsion”.
Faupin, A.; Gorce, P. ; Rémy-Néris, O. ; Thevenon, A. (France) ....................................... ...........146
“Classification of evoked potentials by pearson’s correlation in a brain-computer interface”.
F. Cabestaing; T. M. Vaughan; D. J. M c Farland; J. R. Wolpaw (France-USA) ................ ..........156
“A methodological framework for writing assistance systems: applications to sibylle and VITIPI systems”. P. Boissière; I. Schadle; J. Y. Antonie ( France) .................................................. ..........167
“ARTUS: synthesis and audiovisual watermarking of the movements of a virtual agent interpreting subtitling using cued speech for deaf televiewers”. G. Bailly; V. Attina; C. Baras; P. Bas; S. Baudry ;
D. Beautemps ; R. Brun ; J. M. Chassery ; F. Davoine ; F. Elisei ; G. Gigert ; L. Girin ; D. Grison ;
J. P. Léoni ; J. Liénard ; N. Moreau ; P. Nguyen (France) ................................................... .........177
“French cue speech: from production to perception and vice-versa”.
V. Attina; M. A. Cathiard; D. Beautemps (France) ............................................................. ..........188

Modelling D - 2006

Vol. 27 nº 1
“An inventory model of deteriorating items with time-varying demand and shortages”.
A. Roy; G. P. Samanta ( India) .............................................................................................. ..........1
“A JELS probabilistic inventory model with random demand having uniform distribution in a one vender-one customer situation”. D. A. Khan; U. C. Ray; G. Panda ( India) ....................................... ..........19
“Modelling of an industrial enterprise using a feedback control system’s approach”.
G. P. Modak; V. H. Tatwawadi ( India) ............................................................................... ..........35
“Design of experimentation and formulation of approximate experimental model for assessment of productivity of women workers”. S.G. Patil; J. P. Modak ( India) ......................................... ..........49
“Discussion about risc-control of investment: Research on transformation system of fuzzy error set”.
H. Liu; K. Guo ( China) ....................................................................................................... ..........63
“Heath impact optimisation model for the Guinea Warm eradication programme (NIGEP)”.
S. C. Inyama ( Nigeria) ........................................................................................................ ..........71

Vol. 27 nº 2
“The heuristic strategy implementation to the hopfield-tank TSP neural algoritm”.
N. Novac; S. Bauk ( Serbia and Montenegro) ........................................................................ ..........1
“Transportation problems with fuzzy data”. N. M. Badra ( Egypt) ......................................... ..........21
“One-element fuzzy error-matrix”. H. Liu; K. Guo (China) .................................................... ..........33
“Multi-item inventory control for a production system of deteriorating items with dynamic demand and shortage under inflation and discounting”. K. Maity; M. Maity ( India) .................................... .........43
“Matter elements systems models and principles of product innovative and creative design”.
Guowei Zhang ( China) ......................................................................................................... .........57
“A back-propagation algorithm applied to forecast coconut yield”.
M. Balakrishnan; K. Meena ( India) ...................................................................................... .........75

  Vol. 27 nº 3
“Knowledge discovery from library data warehouse using data mining techniques and wavelet transform”. M. F. Qureshi; R. P. Bajpai; R. K. Jangade; P. L. Kande (India) .......................... ..........1
“Constrained probabilistic lost sales inventory system with continuous distribution and varying order”.
H. A. Fergany; M. F. El-Wakeel ( Egypt) ............................................................................ ..........15
“Simulation and energy targeting of the crude distillation unit of the old port-harcourt refinery in Nigeria”. A. N. Anozie; E. Ojoboh-Daniel ( Nigeria) .......................................................................... ..........25
“Application of tolerance approach to marketing distribution decision”. N. M. Badra ( Egypt) ..........37
“Technical efficiency of small holder cassava production in Abia State, Nigeria”.
O. O. Ukona; C. E. Onyenweaku; N. U. Igbokwe ( Nigeria) ............................................... ..........49
“Modelling of compression of lint cotton to form a bale using artificial neural networks”.
J. F. Agrawal; S. L. Pandharipande; R. D. Askhedkar; P. M. Padole; J. P. Modak (India) ... ..........59

Vol. 27 nº4
“A fuzzy stochastic inventory model of deteriorating items with ramp tipe demand rate over a finite time horizon”. D. Panda; S. Kar ( India) ...................................................................................... ..........1
“Time series analysis of HIV cases in Imo State, Nigeria”. S. C. Inyama; H. C. Iwu (Nigeria) ...........21
“Inventory management of deteriorating items”. Hassan A. M. Soltan ( Egypt) ...................... ...........37
“The environment within the social responsibility of business and its relation ship with economic policy”. A. Villamil Serrano ( Spain) ................................................................................................. ..........49
“Hierarchic framework for machine scheduling”. Hassan A. M. Soltan (Egypt) ...................... ..........63